A clean edge. Elegant on the façade.
Your home opens up to the garden.
The elegance of a shade sail with the function of an awning – the shaft is mounted on the house wall and the sail extends in a straight line.
How FRAME works
One rectangle. One shaft. One clean line.
On the FRAME, the shaft is mounted on one side, on the house wall or façade. From there the sail extends in a straight line – like an awning, but with the light shape of a tensioned shade sail.
At the front, a profile bar is inserted into the fabric. It ensures even tension and a clean front edge. Two stainless steel tension posts keep the sail pre-tensioned.

FRAME on the façade – shade for the roof terrace.
Roll out
By remote control, app or sensor – the sail extends from the façade in a straight line.
Tension
The profile bar and tension posts with rope store keep the fabric pre-tensioned.
Roll up
When not in use, the fabric rolls up completely onto the shaft on the façade.

FRAME in an outdoor dining area – supported at the front on two stainless steel posts.
FRAME or awning?
Supported at the front. More stable in the wind.
Installation and operation are similar to an awning: the fabric extends from the façade and rolls back up.
An awning, however, hangs only on the wall and is carried freely by folding arms. The FRAME is additionally supported at the front on two stainless steel tension posts and firmly tensioned there – which makes it considerably more wind-stable than a freely cantilevered awning. With its slender posts it still looks light and open, for example in an outdoor dining area.
Design & materials
Reduced to the essentials.
Few, high-quality components and a clear geometry – for a calm appearance on your façade.
| Sail area | up to 60 m² |
|---|---|
| Construction | Shaft on one side on the façade, profile bar at the front of the fabric |
| Pre-tension | Two tension posts with integrated rope store |
| Posts | V2A stainless steel, brushed |
| Pulleys | High-load, made in-house – for guiding the rope to the tensioning system |
| Drive | Electric |
| Fabric | NANO, ACRYL or NET – in many colours Compare the fabrics → |
| Control | Radio, app, smart home, sun, wind and rain sensors |
| Ideal for | House façades, shading close to walls |

Shaft on the wall bracket

High-load pulley, made in-house

Tension post with integrated rope store
Standard size · Click to open the 3D planner
3D planner
Your FRAME in 3D.
This is a FRAME in standard size. In the 3D planner you set the dimensions, posts and fabric colour yourself – and see exactly where the shade falls.
More area?
For large areas: the DUO.
Two rectangular sails, controlled together by our in-house dual-motor controller – for areas up to 100 m².
Frequently asked questions
Good to know.
Your FRAME
Tell us about your favourite spot.
Approximate dimensions and a few photos are enough. We check feasibility and put you in touch with the right SOLSAIL partner in your region.
